Serving the Houston area  ·  (832) 209-7659  ·  Open Mon-Sun 7am-7pm
📞 (832) 209-7659 Free Quote

Metal Roofing in Baytown, TX (77520) · Local Professionals

Houston Metal Roofing · Fast response in Baytown and the Houston area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+196Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Baytown is a working waterfront city where the salt air off Galveston Bay eats at fasteners and the hurricane wind peels back panels that weren't screwed down right. The housing stock here runs from older ranches and raised bungalows near the bayfront to brick subdivisions off Garth Road, and most of those roofs take a beating from sun, storms, and humidity year after year.

We're Houston Metal Roofing, and we work Baytown (77520) and the surrounding Houston area every week. Whether you're near the Baytown Nature Center or off I-10 by San Jacinto Mall, we know how the local weather and the bayfront exposure affect metal roofs, and we're fully insured with general liability and workers' compensation.

Metal Roofing in Baytown (77520)

Baytown sits low and flat on the coastal prairie, and that means drainage matters. Heavy rain from Gulf storms can pond on flat lots and push water against foundations, so we pay attention to how your roof sheds water and where it runs. The salt air near the Ship Channel and the bayfront corrodes cheap fasteners and thin panels, so we use corrosion-resistant screws and check existing roofs for rust at the laps. Older homes around Baytown often have low-pitched roofs or multiple layers of shingles, and we can tell you whether a retrofit over shingles makes sense or if a full tear-off is the safer bet. We also deal with tight lot access in older neighborhoods and coordinate with HOAs in the newer subdivisions.

Our team has been installing, repairing, and replacing metal roofs across the Houston area for years, and we bring that experience to every Baytown job, from a small leak repair to a full standing seam install.

Our services in Baytown

How a Job Works in Baytown

Step 1: You call us at (832) 209-7659 or request a free estimate online. We schedule an on-site assessment at your Baytown property, inspect the roof and attic, and talk through options and pricing. No pressure, no gimmicks.

Step 2: Once you approve the scope, we pull the required permits through the City of Baytown and schedule the work. Our crews are used to Baytown's tight lots and older home layouts, and we protect landscaping and siding as we work. If your home is in an HOA, we help you get the panel profile and color approved before we order materials.

Step 3: After the job, we clean up thoroughly, haul away old materials, and walk the roof with you to make sure you're satisfied. We leave your property clean and your roof ready for the next storm season.

Metal roofing in Baytown is priced by the square foot, and the final number depends on roof size, pitch, access, and condition. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. A retrofit over existing shingles starts at $7 per square foot, but keep in mind that code limits how many layers you can recover. Repairs like leak fixes start at $450, screw replacement and re-fastening starts at $750, and coating or painting starts at $2.50 per square foot. Storm and wind damage inspections are free. Call (832) 209-7659 for a free estimate tailored to your Baytown property.

My Baytown house is near the bayfront and the salt air has rusted the screws on my metal roof. Can you replace them without replacing the whole roof?
Yes. We offer screw replacement and re-fastening starting at $750. We pull the old fasteners, check the panels for elongation or rust at the holes, and install new corrosion-resistant screws with sealing washers. If the panels themselves are compromised, we'll tell you honestly whether a repair or replacement makes more sense.
A storm just blew through Baytown and lifted some panels on my roof. How fast can you get out to inspect the damage?
We offer free storm and wind damage inspections, and we prioritize active leaks and lifted panels. Call us at (832) 209-7659, and we'll schedule the soonest available visit. If it's an emergency, tell us on the phone and we'll do our best to get someone out quickly.
What does a typical metal roof replacement cost for a 1,500 square foot ranch in Baytown?
For a 1,500 square foot roof, a basic metal roof installation might start around $12,000 based on our $8 per square foot starting rate, but the actual price depends on pitch, access, whether we need to tear off existing layers, and the panel type. Standing seam and stone-coated steel cost more. Call (832) 209-7659 for a free estimate.
Do I need a permit from the City of Baytown to replace my roof, and can you handle that for me?
Roofing permits are commonly required for a full replacement or re-roof in Baytown, and the rules vary by jurisdiction. We pull the necessary permits as part of the job and coordinate inspections. You can check the City of Baytown website for general information, but we'll guide you through what's needed for your specific project.
My neighbor and I disagree about where the property line is, and I want to make sure my new metal roof doesn't cause drainage onto their yard. How do you handle that?
We design the roof and gutters to manage water on your property, and we can adjust downspout locations to direct flow away from the property line. If there's a dispute, we recommend having a survey done before work starts. For HOA communities, we help you get approval for panel style and color before we order materials.
Are you fully insured for roofing work in Baytown?
Yes. We carry general liability insurance and workers' compensation coverage for every job. We're happy to provide proof of insurance before we start work on your Baytown property.
What kind of maintenance does a metal roof need in Baytown's climate, and when should I schedule it?
In Baytown, the salt air and summer storms mean you should inspect your metal roof once a year, ideally in spring before hurricane season. Check for loose or rusted screws, lifted panels, and debris in the gutters. A coating every few years can extend the life of older panels. We offer inspections and maintenance plans, so call (832) 209-7659 to schedule.
Why choose us?

Trusted professionals in Houston

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Houston

All your work handled by qualified professionals in Houston

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

196+ Verified Client Reviews in Houston

⭐⭐⭐⭐⭐ 4.9/5 · 196 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Houston · Response within 24h · No commitment · ☎ (832) 209-7659

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Houston ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm