Serving the Houston area  ·  (832) 209-7659  ·  Open Mon-Sun 7am-7pm
📞 (832) 209-7659 Free Quote

Metal Roofing in Friendswood, TX (77546) · Local Professionals

Houston Metal Roofing · Fast response in Friendswood and the Houston area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+196Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Friendswood is a town of big lots, long driveways, and mature pecan and live oak trees, where ranch homes and newer two-story builds sit close to Clear Creek and the bayou greenbelts. If your roof is showing its age, you are probably weighing shingle replacement against a metal system that can handle Gulf Coast heat, hurricane wind, and the afternoon thunderstorms that roll in off the bay.

Homeowners in 77546 call Houston Metal Roofing because we know how these roofs fail here: wind-lifted panels, rusted fasteners, and flashing gaps around chimneys and skylights.

Metal Roofing in Friendswood (77546)

Friendswood sits on flat coastal prairie with expansive clay soil that moves with the seasons, and many homes here are surrounded by large trees that drop limbs and shade the roof enough to keep it damp. That combination means we pay close attention to decking condition, ventilation, and fastener placement, because a metal roof is only as good as what is under it. Creek-side properties near Clear Creek and the Friendswood greenbelts see more humidity and wind-driven rain, so we check seams and flashing carefully. Large lots usually mean good access for staging materials, but mature landscaping and long driveways can slow the work, and we plan for that.

Our team has installed and repaired metal roofs across Friendswood and the surrounding Houston area, from simple corrugated panel roofs on sheds and ranches to standing seam and stone-coated steel on larger homes. We know which profiles shed heat and wind best here and how to detail a roof so it holds up through hurricane season.

Our services in Friendswood

How a Job Works in Friendswood

Step 1: Call us at (832) 209-7659 or request a free estimate. We schedule an on-site assessment, inspect the roof and attic, check for leaks, rust, and loose fasteners, and talk through options and budget. You get a written scope before any work starts.

Step 2: Once you approve, we pull the required permits through the City of Friendswood and coordinate with your HOA if your neighborhood has design rules. Our insured crews remove the old roof or install over it where code allows, stage materials carefully on your lot, and keep the site secure each day. We watch the weather and schedule around storms.

Step 3: We clean up thoroughly, haul away debris, and walk the roof and yard with you. You get a final inspection and a clear explanation of what was done, plus maintenance tips for the years ahead.

Pricing in Friendswood depends on roof size, pitch, access, and condition. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and metal over shingles (retrofit) around $7. Repairs and leak fixes start around $450, screw replacement and re-fastening around $750, and flashing or skylight repair around $600. Coating and painting start around $2.50 per square foot, and gutters for metal roofs run about $9 per linear foot. Larger homes, steep pitches, multiple stories, and heavy tree cover can raise the number, and storm damage work may be covered by insurance. Call (832) 209-7659 for a free, no-pressure estimate.

My Friendswood ranch has huge pecan trees dropping limbs on the roof. Can metal roofing handle that better than shingles?
Yes, in most cases. Metal panels resist punctures from falling limbs better than asphalt shingles, and small dents do not cause leaks the way cracked shingles can. We inspect the decking and fasteners after any major limb drop, and we can recommend tree trimming to reduce future problems.
A storm just peeled back part of my metal roof in Friendswood. How fast can you respond?
We prioritize active leaks and storm damage. Call (832) 209-7659 and we will schedule an inspection as quickly as possible, often same or next day depending on storm volume. We can tarp or secure the area to prevent further water intrusion while we prepare a repair plan.
What does a typical metal roof replacement cost for a 2,000 square foot home in 77546?
For a standard single-story home that size, a metal roof replacement often falls in the range of $18,000 to $24,000 depending on the panel type, pitch, and whether old roofing is removed. Standing seam runs higher than corrugated panel. We give you a firm written estimate after inspecting the roof.
Do I need a permit to replace my roof in Friendswood, and does the city inspect it?
Yes, a roofing permit is commonly required for a full replacement, and inspection requirements vary. We handle the permit application and coordinate inspections with the City of Friendswood. You can review local rules on the City of Friendswood website, and we will walk you through what applies to your project.
My HOA requires a certain roof color. Can you help with approval, and what about property lines?
We can provide product samples and documentation your HOA design review may request, and we follow the approved color and profile. For property lines, we keep all work on your side and follow setback rules; if a neighbor's tree or structure is involved, we recommend confirming the plat or survey before work begins.
Are you fully insured for work on my Friendswood property?
Yes. We carry general liability insurance and workers' compensation coverage for our crews.
What maintenance should I do on a metal roof in Friendswood between storms?
Keep gutters and valleys clear of leaves and pecan debris, trim branches back from the roof, and have fasteners and sealant checked every couple of years, especially after hurricane season. A free inspection can catch loose screws or flashing gaps before they become leaks. Call (832) 209-7659 to schedule one.
Why choose us?

Trusted professionals in Houston

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Houston

All your work handled by qualified professionals in Houston

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

196+ Verified Client Reviews in Houston

⭐⭐⭐⭐⭐ 4.9/5 · 196 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Houston · Response within 24h · No commitment · ☎ (832) 209-7659

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Houston ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm