Serving the Houston area  ·  (832) 209-7659  ·  Open Mon-Sun 7am-7pm
📞 (832) 209-7659 Free Quote

Metal Roofing in Tomball, TX (77375) · Local Professionals

Houston Metal Roofing · Fast response in Tomball and the Houston area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+196Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Tomball still feels like a small town even with Houston growing right up to its edges. The mix here is hard to miss: older bungalows and brick ranches near the downtown square, newer large-lot homes out toward FM 2920 and the Grand Parkway, and plenty of tall pines and oaks hanging over both.

That mix is exactly why homeowners in 77375 call us. One street needs a standing seam roof built for hail and summer heat, the next needs a corrugated panel retrofit over an aging shingle roof. We handle both, and we know how the trees, storms, and clay soil around Tomball treat a roof.

Metal Roofing in Tomball (77375)

Tomball sits on the same flat Gulf Coast prairie as the rest of Harris County, on expansive clay that moves with every wet and dry cycle. That movement shows up at flashings, valleys, and penetrations, and it is one reason we look closely at the roof-to-wall transitions on older homes near the downtown square. The bigger local factor is the tree canopy. Pines and oaks overhang a lot of Tomball roofs, which means limb strikes, pine straw buildup in valleys, and shade that keeps moisture around longer after a rain. Newer subdivisions off FM 2920 and Holderrieth tend to have tighter lot lines and steeper architectural roofs, so panel layout and access take more planning than they would on a wide-open ranch.

Our team works Tomball and the surrounding Houston area regularly, from historic downtown blocks to the large-lot homes going up west of town. We install, repair, and replace metal roofs built for heat, hail, and straight-line wind, and we deal with the insurance paperwork when a storm has done real damage.

Our services in Tomball

How a Job Works in Tomball

Step 1: you call (832) 209-7659 or request a free estimate, and we set a time to walk the roof and the attic with you. We check fasteners, seams, flashing, and decking, and we tell you plainly whether a repair makes sense or a replacement does. You get a written scope and price before anything starts.

Step 2: we pull the required roofing permit through the City of Tomball and coordinate any HOA design review before materials are ordered. On tight lots near the square or in newer subdivisions, we plan panel staging and dumpster placement so driveways and neighbor access stay clear. Crews are fully insured and handle the tear-off, decking repairs, and installation in sequence so the roof is never left open overnight.

Step 3: cleanup is part of the job. We magnet-sweep for nails, haul off old material, and walk the property with you at the end to confirm flashing, gutters, and penetrations are right. We do not consider the job done until you have looked at it yourself.

Pricing in Tomball depends on roof size, pitch, access, decking condition, and how quickly you need it done. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) around $7, and full installation around $8. Standing seam starts around $10 per square foot, with copper and specialty metals around $20. Repairs and leak calls start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight work at $600. Coating and painting starts around $2.50 per square foot. These are starting figures, not a quote. Call (832) 209-7659 for a free estimate on your specific roof.

My house near downtown Tomball has a low-pitched roof and big oaks over it. Can metal work here?
Yes, and it is a common setup in the older parts of town. Low pitch limits some panel profiles because water has to shed reliably, so we usually look at standing seam or a mechanically seamed panel with the correct underlayment. The oaks matter too: we plan for pine straw and leaf buildup in valleys and behind chimneys, and we make sure the panels can be cleaned without damaging the finish.
A storm just dropped a pine limb through my roof in Tomball. How fast can you get out?
Call (832) 209-7659 and tell us what happened. We prioritize active leaks and storm damage, and we can often get out the same day or next to tarp or make a temporary repair so water stops coming in. From there we document the damage for your insurance claim and give you a written repair or replacement scope.
What does a typical metal roof replacement cost in the Tomball area?
Most full replacements in 77375 land somewhere between the starting rates and the final number, which depends on square footage, roof complexity, decking condition, and panel type. Corrugated panel is the least expensive option, standing seam and stone-coated steel sit in the middle, and copper is at the top. We give you a free written estimate so you are comparing real numbers, not guesses.
Do I need a permit to replace my roof in Tomball?
In most cases yes, a full replacement or re-roof requires a permit, and the rules on layers, inspections, and fees are set locally. We handle the permit application for you and schedule the inspections. For the current requirements, check the City of Tomball website or call the building department directly, since rules can change.
My HOA has design rules. Will they approve a metal roof?
Many Tomball-area HOAs do approve metal, but they often restrict panel profile, color, and sometimes visibility from the street. We can provide product specs, color samples, and drawings to submit with your architectural request. On property lines, Texas rules generally let you work on your own roof, but we keep panels and equipment on your side and talk with neighbors in advance when access is tight.
Are you insured for work on my Tomball property?
Yes. That protects you if anything goes wrong on your property and covers our crew while they are on your roof.
What maintenance does a metal roof need in Tomball's heat and storms?
Not much compared to shingles, but it is not zero. Once a year, ideally before spring storm season, clear pine straw and leaves from valleys, gutters, and behind chimneys, and check that fasteners and sealant at flashings are intact. After a hail or wind event, have the roof inspected for lifted panels or loosened screws. We offer free inspections and can re-fasten or replace screws before a small issue turns into a leak.
Why choose us?

Trusted professionals in Houston

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Houston

All your work handled by qualified professionals in Houston

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

196+ Verified Client Reviews in Houston

⭐⭐⭐⭐⭐ 4.9/5 · 196 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Houston · Response within 24h · No commitment · ☎ (832) 209-7659

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Houston ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm