Serving the Houston area  ·  (832) 209-7659  ·  Open Mon-Sun 7am-7pm
📞 (832) 209-7659 Free Quote

Metal Roofing in League City, TX (77573) · Local Professionals

Houston Metal Roofing · Fast response in League City and the Houston area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+196Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

League City is a bay-area town where the wind comes off Galveston Bay with nothing to stop it, and the roofs take the hit. From the older brick ranches near League City Parkway to the newer two-story subdivisions off FM 518 and the waterfront homes near Clear Lake, most houses here are built for shade and AC, not for 90 mph gusts and sideways rain.

That is why homeowners in 77573 call Houston Metal Roofing. We install, repair, and replace metal roofs built for Gulf Coast weather, and we know the difference between a roof that looks tough and one that actually holds its fasteners through a hurricane season.

Metal Roofing in League City (77573)

League City sits on flat coastal prairie with clay soil that moves with the seasons, and many lots are tight, with mature live oaks and pecans hanging over the roofline. That combination matters. Tree limbs drop on low-slope porches and garage extensions, and the shade keeps shingles damp long enough for algae streaks to take hold. Near the bay and the Ship Channel, salt air works on fasteners and cut edges, so we spec corrosion-resistant screws and trim and we check every penetration. After a storm, the failure we see most is wind-lifted panels and separated seams at the gable and ridge, not the field of the roof. We handle standing seam and stone-coated steel on the newer large-lot homes, and we retrofit metal over existing shingles on the 1970s and 1980s ranches where the deck is still sound.

Our crews work League City and the surrounding Houston area regularly, from the subdivisions off South Shore Boulevard to the older streets near the municipal complex. We pull permits through the local jurisdiction and coordinate with HOAs on panel profile and color before anything gets ordered.

Our services in League City

How a Job Works in League City

Step 1: you call (832) 209-7659 and we set a free on-site assessment. We walk the roof, check the deck and flashing, look at attic ventilation, and take photos. You get a written scope with material options and a clear price, not a range that changes later.

Step 2: we schedule the work and handle the permit and any HOA paperwork. On tight lots with pools, fences, or low tree canopy, we plan panel staging and use a magnet sweep daily so nails do not end up in the grass or the driveway. If your home is in a flood-prone pocket near the bay, we keep materials off the ground and protect the landscaping.

Step 3: cleanup and a final walkthrough. We haul off old material, sweep the yard and gutters, and walk the roof with you to show the finished seams, flashing, and fasteners. We leave your property clean, and we do not ask for final payment until you have seen the work.

Pricing in League City depends on roof size, pitch, access, deck condition, and how soon you need it done. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) around $7, installation around $8, replacement around $9, and standing seam around $10. Stone-coated steel and metal shingle systems start around $9, and copper or specialty metal runs from $20. Repairs and leak calls start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight work at $600. Storm and wind damage inspections are free, and we document what we find for your insurance file. Call (832) 209-7659 for a free estimate on your League City property.

Do metal roofs hold up to hurricane wind in League City better than shingles?
Generally yes, when they are installed correctly. The weak points are fasteners, seams, and edge flashing, not the panel itself. We use wind-rated fastening patterns and sealed seams, and we check the gable and ridge details that tend to lift first in bay-area wind. A properly fastened standing seam roof is a strong choice for 77573.
How fast can you respond to storm damage in League City?
We prioritize active leaks and wind-lifted panels. Call (832) 209-7659 and we will schedule an inspection, often the same day or next, depending on storm volume. We can tarp or secure an open roof to limit water intrusion while you wait for repairs or an insurance decision.
What does a typical metal roof replacement cost in League City?
Most full replacements fall between the low teens and mid twenties per square foot installed, depending on material. A basic ribbed panel roof is at the lower end, standing seam and stone-coated steel at the higher end. Size, roof complexity, deck repairs, and tear-off add to the total. We give a firm written number after the free inspection.
Do I need a permit for a metal roof in League City?
Roofing permits are commonly required for a full replacement or re-roof, and the rules and inspection requirements can vary. We verify the current requirements with the City of League City before work starts. You can also check the City of League City website at https://www.leaguecitytx.gov/ for general information. We handle the paperwork as part of the job.
What if my HOA or a neighbor has concerns about the metal roof color or property line?
Many League City subdivisions have design review for roof color and panel profile. We can provide product samples and spec sheets for your HOA submission. On property lines, we keep the work on your side and follow setback rules for overhangs and drainage. If there is a dispute, we document the roofline and drainage direction before we start.
Are you insured for work on my League City home?
Yes. That protects you if anything goes wrong on your property and covers our crew while they are on your roof.
What maintenance does a metal roof need in League City's climate?
Check fasteners and sealant at penetrations once a year, especially after storm season. Keep tree limbs off the roof and gutters clear, since live oaks and pecans drop debris that traps moisture. Near the bay, rinse salt residue occasionally and touch up any scratched paint or cut edges to prevent corrosion. A short annual inspection catches small issues before they become leaks.
Why choose us?

Trusted professionals in Houston

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Houston

All your work handled by qualified professionals in Houston

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

196+ Verified Client Reviews in Houston

⭐⭐⭐⭐⭐ 4.9/5 · 196 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Houston · Response within 24h · No commitment · ☎ (832) 209-7659

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Houston ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm