Serving the Houston area  ·  (832) 209-7659  ·  Open Mon-Sun 7am-7pm
📞 (832) 209-7659 Free Quote

Metal Roofing in Bellaire, TX (77401) · Local Professionals

Houston Metal Roofing · Fast response in Bellaire and the Houston area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+196Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Bellaire is a small city with a big personality, where 1950s ranches sit on wide lots under live oaks and new builds rise beside them, all just inside the Loop and minutes from the Texas Medical Center. The mix of original brick homes and large new construction means roofs here face different challenges, from low-pitched shingle roofs on older ranches to steep metal roofs on newer builds.

Homeowners in Bellaire (77401) call Houston Metal Roofing because we understand the local conditions: heavy rain, live oak limbs, and the occasional hail storm.

Metal Roofing in Bellaire (77401)

Bellaire sits on flat Gulf Coast prairie with expansive clay soil that shifts with the seasons, which can affect roof alignment and flashing seals. The city's housing stock includes 1950s ranches with low-slope roofs and large new builds with complex rooflines, often surrounded by mature live oaks, pecans, and magnolias. These trees are beautiful but drop limbs and debris that can damage roofs and clog gutters. Heavy summer thunderstorms and hurricane-season winds test every roof, and the shade from old trees can promote algae and mildew growth. Our team knows how to handle the tight lot access in Bellaire, where mature landscaping and fences can make equipment placement tricky, and we always take care to protect your gardens and driveways.

We have years of experience serving Bellaire and the surrounding Houston neighborhoods, from Meyerland to West University. Whether you need a new standing seam roof or a repair after a storm, we bring local knowledge to every job.

Our services in Bellaire

How a Job Works in Bellaire

Step 1: Call us at (832) 209-7659 or request a free estimate online. We will schedule a time to inspect your roof and discuss your needs. Our assessment includes checking for leaks, damaged flashing, and the overall condition of your current roof. We will provide a written estimate with clear pricing and options.

Step 2: Once you approve the estimate, we will schedule the work. In Bellaire, we coordinate with the city's permitting process, which typically requires a permit for roof replacements. We also work with HOA requirements if your neighborhood has design guidelines. Our crew arrives on time, sets up safely, and works efficiently to minimize disruption. We use quality materials and proven techniques to ensure your new metal roof performs well for years.

Step 3: After the job is done, we clean up thoroughly, removing all debris and magnetic nails from your yard and driveway. We walk through the finished work with you, answer any questions, and provide care instructions. We leave your property clean and your roof ready to protect your home.

Pricing for metal roofing in Bellaire depends on the size and complexity of your roof, the material you choose, and the condition of your existing roof. For example, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot. Repairs, such as fixing a leak or replacing flashing, start at $450, and screw replacement starts at $750. We also offer coatings from $2.50 per square foot. These are ballpark figures; every roof is different. Call us at (832) 209-7659 for a free estimate tailored to your home.

My Bellaire ranch has a low-pitch roof and large live oaks overhead. What metal roofing options work best?
For low-pitch roofs, standing seam metal roofing is often the best choice because its raised seams and concealed fasteners provide excellent water shedding. It also resists debris buildup from overhanging branches. We can also install corrugated or ribbed panels, but we will evaluate your roof's structure and pitch to recommend the right system. With live oaks, we suggest trimming branches away from the roof and choosing a lighter color to reduce heat absorption.
A storm just knocked a limb onto my roof in Bellaire. How quickly can you respond for emergency repair?
We prioritize storm damage calls in Bellaire and the surrounding areas. Call us at (832) 209-7659, and we will schedule an inspection as soon as possible, often within 24 to 48 hours. Our team can tarp or patch the damage to prevent further water intrusion and then provide a full repair estimate. We work with your insurance company if needed.
What is the typical cost to replace a roof on a 1950s ranch in Bellaire?
For a typical 1,500 to 2,000 square foot ranch, a metal roof replacement might range from $12,000 to $20,000, depending on the material and complexity. Standing seam is at the higher end, while corrugated panels are more economical. Factors like roof access, the number of penetrations (chimneys, skylights), and whether we need to remove existing layers affect the price. We provide a detailed free estimate.
Do I need a permit from the City of Bellaire to replace my roof?
Yes, the City of Bellaire typically requires a permit for roof replacements. Requirements can vary, so it is best to check with the city directly. You can find contact information and hours on the City of Bellaire website at https://www.bellairetx.gov/. We can help guide you through the permit process as part of our service.
My neighbor's tree hangs over my roof in Bellaire. Can I trim it, and do I need HOA approval for a metal roof?
In Bellaire, property owners generally have the right to trim branches that overhang their property line, but it is wise to check local ordinances and talk to your neighbor first. For HOA approval, many Bellaire neighborhoods have design guidelines that may restrict metal roof colors or profiles. We recommend submitting your proposed roof design to your HOA before installation. We can provide material samples and specifications to help with the approval process.
Are you fully insured for roofing work in Bellaire?
Yes, Houston Metal Roofing is fully insured, carrying both general liability and workers' compensation insurance. This protects you and your property in case of any accidents during the project.
How often should I have my metal roof inspected in Bellaire's climate?
We recommend an inspection every two to three years, and after any major storm. Bellaire's heat, humidity, and tree debris can cause issues like loose fasteners, clogged gutters, and algae growth. Regular inspections catch small problems before they become leaks. We offer free estimates for inspections and can perform routine maintenance to extend the life of your roof.
Why choose us?

Trusted professionals in Houston

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Houston

All your work handled by qualified professionals in Houston

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

196+ Verified Client Reviews in Houston

⭐⭐⭐⭐⭐ 4.9/5 · 196 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Houston · Response within 24h · No commitment · ☎ (832) 209-7659

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Houston ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm