Serving the Houston area  ·  (832) 209-7659  ·  Open Mon-Sun 7am-7pm
📞 (832) 209-7659 Free Quote

Metal Roofing in Galveston, TX (77554) · Local Professionals

Houston Metal Roofing · Fast response in Galveston and the Houston area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+196Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Galveston's historic Victorians and island cottages take a beating from salt air, hurricane wind, and constant humidity. If you live near the Strand or in one of the island's older neighborhoods, you know that a roof here isn't just shelter; it's a defense system against everything the Gulf throws at it.

Homeowners in Galveston (77554) call Houston Metal Roofing because we understand the specific challenges of roofing on the island. From the ornate copper turrets of East End Victorians to the low-slung cottages in Fish Village, we've seen how salt spray and storm-driven rain can destroy a roof that isn't built for this environment. We're based in Houston, just up I-45, and we bring insured crews who specialize in coastal metal roofing systems that hold up to the Gulf Coast climate.

Metal Roofing in Galveston (77554)

Galveston is a barrier island, and that changes everything about roofing. The ground here is sand and fill, not the expansive clay you find inland, so foundation movement is less of an issue, but wind uplift is a constant threat. Historic districts like the East End and the Strand require design review for visible roof changes, and many homes sit on tight lots with mature live oaks and pecans that drop limbs and shade the roof, which can lead to algae and mildew. Salt air corrodes fasteners and flashing faster than anywhere else in the Houston area, so we use stainless steel or coated fasteners and heavy-gauge flashing on every job. Whether you're in a raised cottage near the seawall or a newer build in Pirates Beach, we know how to handle the access, the permits, and the coastal building codes that apply here.

Our team has been serving Galveston and the surrounding Houston area for years. We've worked on everything from historic copper roofs to modern standing seam installations, and we understand the local building department's requirements. For details on permits and inspections, you can check the City of Galveston website, but we'll also walk you through the process and handle the paperwork.

Our services in Galveston

How a Job Works in Galveston

Step 1: Call us at (832) 209-7659 or request a free estimate online. We'll schedule an on-site assessment at your Galveston property, whether it's a beachfront cottage or a historic home downtown. We'll inspect your existing roof, check for leaks, corrosion, and wind damage, and discuss your options for repair, replacement, or a new installation. We'll also review any historic district or HOA requirements that might affect your project.

Step 2: Once you approve the estimate, we'll order materials and schedule the work. On the island, we often deal with tight alley access and narrow driveways, so we plan deliveries and staging carefully. If your home is in a historic district, we'll coordinate with the city's design review process to make sure your new roof meets the guidelines. Our crews are trained to work safely around mature trees and power lines, and we always protect your landscaping and siding during installation.

Step 3: After the work is done, we do a thorough cleanup, including magnet sweeping for nails and debris. We'll walk the property with you to make sure you're satisfied, and we'll provide documentation for your insurance claim if needed. We leave your property clean and your roof ready for the next storm season.

Pricing for metal roofing in Galveston depends on the material, the size and pitch of your roof, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam runs from $10 per square foot, and metal roof replacement starts at $9 per square foot. If you're considering a retrofit over existing shingles, that starts at $7 per square foot, but keep in mind that local code limits how many layers you can have. Repairs, including leak fixes, start at $450, and screw replacement or re-fastening starts at $750. For a precise quote on your Galveston home, call us at (832) 209-7659 for a free estimate. We'll give you honest numbers and explain the cost factors, like access, urgency, and whether your roof needs structural repairs.

My Victorian in the East End has a steep roof with ornate trim. Can you match the historical look with metal?
Yes. We specialize in copper and specialty metal roofing that can replicate the look of traditional materials while providing modern durability. We'll work with you and the historic district guidelines to choose a profile and color that fits your home's character.
A storm just blew through and I have a leak in my roof in Galveston. How quickly can you respond?
We offer emergency storm and wind damage repair with free inspections. Call us at (832) 209-7659, and we'll schedule a prompt assessment. We'll tarp or patch the leak if needed and provide a detailed repair estimate.
What's the typical cost to replace a metal roof on a 1,500-square-foot cottage in Galveston?
For a basic corrugated or ribbed panel roof, you might start around $5.50 per square foot, while standing seam could be $10 per square foot or more. A 1,500-square-foot roof could range from $8,250 to $15,000 depending on material and complexity. We'll give you an exact quote after inspecting your property.
Do I need a permit to replace my roof in Galveston, and how do I get one?
Yes, roofing permits are typically required for replacements. The City of Galveston website has information on permits and inspections, but we can guide you through the process and often handle the paperwork for you. Requirements vary, so it's best to check with the city directly.
My neighbor's tree hangs over my roof. Can you trim it or do I need to talk to them first?
If branches are causing damage, you should discuss it with your neighbor. For HOA properties, check your community rules about landscaping and roof maintenance. We can help you document any damage for insurance or HOA purposes.
Are you insured for work on my Galveston property?
Yes, we are fully insured with general liability and workers' compensation coverage.
How often should I have my metal roof inspected in Galveston's salt air?
We recommend an annual inspection, especially after hurricane season. Salt air can corrode fasteners and flashing, and early detection can prevent leaks. We offer free estimates for inspections and can set up a maintenance plan.
Why choose us?

Trusted professionals in Houston

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Houston

All your work handled by qualified professionals in Houston

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

196+ Verified Client Reviews in Houston

⭐⭐⭐⭐⭐ 4.9/5 · 196 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Houston · Response within 24h · No commitment · ☎ (832) 209-7659

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Houston ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm