Serving the Houston area  ·  (832) 209-7659  ·  Open Mon-Sun 7am-7pm
📞 (832) 209-7659 Free Quote

Metal Roofing in Sugar Land, TX (77479) · Local Professionals

Houston Metal Roofing · Fast response in Sugar Land and the Houston area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+196Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Sugar Land is not one kind of town. You have master-planned communities like First Colony and Riverstone with large two-story brick and stucco homes from the 1990s and 2000s, and you have older ranch properties out toward the Brazos River where the lots are bigger and the roofs have seen a few decades of Gulf Coast weather. The flat clay ground and heavy summer storms mean your roof takes a beating, whether it is hail in April or a wind-driven downpour in September.

Homeowners in Sugar Land (77479) call Houston Metal Roofing because we know the difference between a roof that just looks fine and one that is actually ready for the next storm. We have worked on homes near Oyster Creek Park and along Highway 6, and we understand the mix of HOA rules, mature trees, and tight side yards that come with properties here. If you are tired of replacing shingles every few years, metal is worth a serious look.

Metal Roofing in Sugar Land (77479)

Sugar Land sits on flat Gulf Coast prairie with expansive clay soil that moves with the seasons, and that movement matters for your roof. The soil shifts foundations slightly, which can stress flashing and cause gaps at chimneys, vents, and wall intersections. Add in the live oaks and pecans that hang over many older properties near the Brazos River, and you get falling limbs, leaf debris in valleys, and algae streaks from constant humidity. Newer subdivisions like Riverstone and Telfair have their own challenges: tight lot lines, strict HOA design guidelines, and roofs that are often steep and complex, which means more flashing points and more chances for wind-driven rain to find a way in. We handle stone-coated steel roofing and full metal roof replacement for both the older ranch homes and the newer master-planned properties, and we know how to work around the landscaping and fencing that Sugar Land homeowners invest in.

Our team has been serving Sugar Land and the surrounding Houston area for years, and we have seen just about every roof failure this climate can produce. From screw replacement on a 15-year-old standing seam roof to a complete retrofit over existing shingles, we bring the same approach: assess honestly, explain the options, and do the work right.

Our services in Sugar Land

How a Job Works in Sugar Land

Step 1: You call us at (832) 209-7659 or request a free estimate online. We schedule an on-site assessment at your Sugar Land property, usually within a few days. We inspect the roof, check the attic if accessible, look at flashing and fasteners, and talk with you about what you are seeing (leaks, loose panels, granules in the gutters). You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the required permits through the City of Sugar Land. If your home is in an HOA, we help you submit the panel profile and color for approval before ordering materials. On the work day, our crew protects your landscaping, sets up safe access (including for tight side yards common in First Colony), and gets to work. Most residential metal roof replacements take two to five days depending on the size and complexity of the roof.

Step 3: We clean up thoroughly, including a magnet sweep for nails, and walk the property with you. We do not leave until you have seen the finished roof, understand the warranty, and have our contact info for any follow-up questions.

Pricing for metal roofing in Sugar Land depends on the material, the size and pitch of your roof, and how much prep work is needed. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) starts at $7 per square foot, and standing seam starts at $10 per square foot. Stone-coated steel and metal shingle roofing both start at $9 per square foot. For repairs, metal roof leak repair starts at $450, and screw replacement and re-fastening starts at $750. A full metal roof replacement typically starts at $9 per square foot. These are starting prices, not final quotes. The best way to get an accurate number for your home is to call us at (832) 209-7659 for a free estimate. We will look at your roof, measure it, and give you a written price with no surprises.

My home in First Colony has a steep, complex roof with multiple valleys. Is standing seam a good fit, or should I stick with stone-coated steel?
Both can work, but it depends on the look you want and your HOA guidelines. Standing seam gives a clean, modern look and performs well on complex roofs if the installer is experienced with panel layout and flashing. Stone-coated steel can mimic tile or shingle and may be more forgiving on very steep pitches. We will assess your roof, review your HOA rules, and recommend the best option for your home.
A storm just blew through Sugar Land and I have a lifted panel on my metal roof. How fast can you get out?
We prioritize storm damage calls. Call us at (832) 209-7659 and we will schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We can secure the panel temporarily if needed and provide a written estimate for permanent repairs.
What is the typical cost to replace a metal roof on a 2,500 square foot home in Sugar Land?
For a 2,500 square foot home, a metal roof replacement might range from $22,500 to $35,000 or more, depending on the material (corrugated vs. standing seam vs. stone-coated), roof pitch, number of penetrations, and whether we are removing the old roof or installing over shingles. Call us at (832) 209-7659 for a free estimate tailored to your home.
Do I need a permit from the City of Sugar Land to replace my roof?
Yes, a roofing permit is typically required for a full replacement or re-roof in Sugar Land. The exact requirements and fees can vary, so we recommend checking with the City of Sugar Land website or calling the building department. We handle the permit application for you as part of our service.
My HOA requires approval before I change my roof. Can you help with that process?
Absolutely. We work with HOAs in Sugar Land regularly. We can provide product specifications, color samples, and installation details for your HOA submission. We will not order materials or schedule work until you have written HOA approval, so you are not stuck with a roof your association rejects.
Are you fully insured for work in Sugar Land?
Yes, we carry general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Sugar Land's climate?
In Sugar Land, the main things are keeping debris out of valleys and gutters (especially if you have live oaks or pecans), checking fasteners and seals every few years, and washing off algae or mildew streaks. We offer metal roof inspections and maintenance plans. Call us at (832) 209-7659 to schedule a checkup.
Why choose us?

Trusted professionals in Houston

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Houston

All your work handled by qualified professionals in Houston

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

196+ Verified Client Reviews in Houston

⭐⭐⭐⭐⭐ 4.9/5 · 196 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Houston · Response within 24h · No commitment · ☎ (832) 209-7659

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Houston ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm